INDUSTRIAL SUPPLY DIVISION

head01_c-series_eng_1732869343
EXEN
This product is used for the following applications: Concrete pouring in general. Manufacturing of test pieces. Features The cordless vibrator is a handheld, convenient vibrator applicable to both indoor and outdoor worksites without commercial power. Among the main uses of the product are t ...Read more

CORDLESS VIBRATOR C SERIES

Cordless vibrator C series. A powerful cordless vibrator with a large-capacity 18 V, 4.0 Ah lithium-ion battery




Description


This product is used for the following applications:

  • Concrete pouring in general.
  • Manufacturing of test pieces.

Features

The cordless vibrator is a handheld, convenient vibrator applicable to both indoor and outdoor worksites without commercial power. Among the main uses of the product are the compaction of concrete in residential foundations, small secondary concrete products, test pieces, stone masonry, retaining walls, and the concreting of walls in architectural molds of buildings, thereby ensuring a wide range of applications.

Specification

C series

Model

  Power supply

Battery 1 per
  operating time
  (min)

Frequency
(Hz)

Total length
(mm)

Head length
(dia.×Length)
(mm)

Flexible/
Vibe Assen length
(mm)

Weight
(kg)

Flexible/
Vibe Assen
Item code

C25DS

Battery
B1840
DC18V/ 4.0Ah

30

200

767

φ25X447

522

4.1

101488000

C28D

25

795

φ28X475

550

4.2

100677100

C28DL

25

955

φ28X635

710

5.0

101482000

C28F (0.6m)

20

1089

φ28X186

824

4.2

101452000

C28DTK

25

809

Vibrating portion (diameter X length)
φ28X489
Vibration plate (width X length)
42X190

564

4.4

101548000

CPS

20~25

515

Vibrating portion(width X length)
80X190

270

4.5

101490000

CKCA

20

125

415

Vibrating face (width X length)
76X113

169.5

3.9

101486000

With holder

418

120X150

-

5.0

-

 

*The following are times during which the models were checked for operation according to our standards.
*These are weights including that of a battery (0.8kg).
*The holder is optional.

 Using a large-capacity battery

The cordless vibrator C series are powered by a large-capacity 18V, 4Ah lithium-ion cell.
Lithium-ion cells are large-capacity batteries higher in voltage, higher in energy density, and larger in capacity than nickel-cadmium cells and nickel hydrogen cells. Moreover, these cells discharge less of its energy and can be recharged before they become low.

The vibrating body is easy to replace

For electrode types and wall-concreting types, their four bolts can be removed from the motor on the rubber damper flange before replacement. The vibrating body can be replaced. If any part of the product becomes worn, it can be easily replaced. The motor type is common to all models of cordless vibrators.

For flexible types, you have only to loosen their hose gland (the right screw) before you can easily replace the vibrator assembly.

Electrode types: C25DS, C28D, C28DL
These models are suited for worksites with many rebars in them and allow workers to insert the unit vertically into a target point in a deep layer of soil and then pour concrete in there. They therefore ensure a highly strong finish of concrete.
Model values represent the outer diameters of the vibrators.
For the lengths of the vibrating units, see the table of specifications.

Flexible type: C28F (0.6m)
The flexible vibrator has its vibrating unit extended with flexible hose to transmit revolution through its flexible shaft.
You can use the unit not only at the worker's feet but in a wide range thanks to 0.6 meters of flexible hose.
Connected by a rubber flexible hose, the unit can be used in places where the hose may bend somewhat during concreting.

Wall-concreting types: CKCA and CPS
This vibrator is used in concreting and surface finish by transmitting vibration from outside a mold.
Able to move flexibly in cramped corners and with higher work efficiency, the unit is best suited for worksites on a poorly-conditioned ground.
The CKCA is a type that is pressed against a mold, vibrating it from outside.
The CPS is a type to be inserted into a single cylinder pipe or mold retainer.

From the top; C25DS, C28D, C28DL, C28F (0.6m), CKCA, CPS

 

Equipped standard with a spare battery

Spare batteries were popular in our earlier models. The present model therefore comes with one spare cell with a charger. Housed in a carrying case, the unit is best suited for carrying around and storage on worksites.

 

Excellent characteristics for preventing vibration at hand

Electrode types and wall-concreting types with rubber flanges in them are equipped with excellent vibration protection performance, which makes these vibrators easy on your hands.

REALTEC Engineering Sdn Bhd

No. 38, Jalan Pelepas 4/6, Taman Perindustrian (i-Parc) Tanjung Pelepas, 81550 Gelang Patah, Johor,
West Malaysia.

Contact Info

T :  +607 509 8181
F :  +607 509 8183
E :  RESB.sales@realtec.com.sg

Register Form

Cancel

Sign in to your account